answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How do you replace lugs on rear axle of town?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How much does it cost to replace rear axle on a 2003 Lincoln town car?

In central Florida, $2400


How do you replace rear wheel bearing 1997 Town Country?

Remove the tire and wheel. Remove the axle end. Remove the axle seal. Remove the wheel bearing. Reverse the process to install the new wheel bearing.


How do you replace rear brake pads on 2004 town car?

They have drum brakes there is no pad


How can you stop your rear freeze plug on your 92 Lincoln town car from leaking?

replace it


How many lugs does a linclon town car has?

5 per wheel


How do you fix rear windows on 1992 Lincoln town car?

You replace it like you would a windshield.


How do you change rear coil springs on 97 Lincoln town car?

Jack up the body in front of the rear wheels or use a lift. Remove the rear wheels. Put a jack under the rear axle. Unbolt the bottom of the shocks. Be sure the brake lines do not stretch too far as you lower the axle. You may need to remove a few clips to avoid breaking the lines. I needed to put the jack between the axle and the body to push the axle down far enough. Remove the springs and take them out through the wheel wells. Reverse the process.


How many lugs does a 1988 have Lincoln town car?

5 per wheel , total of 20


How much should it cost to replace a cv joint on a 98 lincolin town car?

Lincoln Town Cars are rear wheel drive vehicles, consequently don't have cv joints.


How do you replace the rear turn signal bulb located on a 2004 Chrysler Town and Country?

Open the rear hatch of your van. There are two black button like protrusions behind the hatch next to the turn signal lamp. Pry these out and remove lens. Replace bulb.


How do you replace the front hub assembly on a 1998 Chrysler Town and Country?

This is extremely easy. Unscrew axle nut, which is held on with 140 lbs of torque, then unbolt 4 bolts holding assembly inplace, slide assembly off axle splines, install in reverse order.


You have a 99 Lincoln Town Car with axle code JY. What is the ratio?

ITS 3.08