0
The front lines are relatively easy. Remove the plastic pan under the engine to gain access. Remove the air filter box from inside the engine compartment for ease of access to the upper front line. Drain the oil. Remove the bolt holding the oil line bracket to the oil filter housing. Remove the wire retaining clips on the oil line connection to the radiator. Remove and discard the old fron oil lines. Insert the new wire clips provided with your new hose into the upper and lower connector on the radiator. Insert the fitting from the lower hose into the fitting and press in until the flared end of the hose mates to the fitting. Pull on the fitting to ensure it is tightly mated. Repeat thne process on the upper fitting. Then insert the plate on the other end of the hose assembly onto the holes on the oil filter housing and insert and tighter the retaining bolt. The rear hose assembly at the oil filter housing is about the same. The retaining plate on the engine side fitting is much more difficult to access.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you fix the front brake line on a 1999 Chevy blazer?
Replace and bleed line
How do you replace a rear brake line on 2000 Chevy blazer?
Length of back brake line to replace. hole in it between front and back door
How do you replace an AC Orifice Tube in a 1995 Chevy Blazer?
it's in the high pressure side of the ac line
How do you replace the fuel filter located on a 2002 Chevy Blazer?
Check under vehicle follow the fule line from the tank
How do you engage the 4WD on a 1999 Chevy Blazer LT?
The 4wd in the 1999 Chevy blazer is electronic, you just have to push the button. If you have pushed the button and it doesn't engage, it might be a vacuum line. The lines are made of rubber and over time they melt. It costs about $25 for a new metal line. Also, the 4wd is under the battery. If you take the battery out, you might notice that a line got disconnected accidentally.
Were can you get a engine schematic on-line for a 1999 Chevy Blazer ZR2 4.3L V6?
Try the following link. You can get any vehicle diagram. The fees are reasonable. I bought the entire wiring diagram for my blazer. http://www.ahdol.com/
What is the fuel line pressure on a 1999 Chevy Blazer s-10?
4.3L engine, 60 to 66 psi. 2.2L engine, 41 to 47 psi.
How do you replace brake lines on 1998 blazer?
replace the line and fill and bleed breaks.
Where is the fuel filter located on a 1986 Chevy Blazer?
On the fuel line going to the carburetor.
When was the Chevy Trailblazer first produced?
The TrailBlazer nameplate was first introduced as an upscale trim line for the Chevy Blazer in the 1999 model year. It was not, however, released as it's own separate model until 2001, for the 2002 model year.
Where can you download a free Chevrolet S10 Blazer repair manual on-line?
Where can I download a free owners manual for chevy blazer S10 1994
Where can i find a Fuel line diagram for military blazer?
The service used a standard civilian (contracted) Chevy Blazer during the 90's.
