Want this question answered?
How do you replace the orifice tube on a 2000 Mercury Marquis
To remove the orifice tube on a 1999 Dodge Ram 3500 you need to cut the tube out of the liquid line. Kits are available at your local auto parts store to replace the orifice tube once you have removed it.
An orifice tube can be removed on the 1999 Dodge Ram 3500 by cutting it out of the liquid line. It is actually easier to replace the whole evaporator tube than just the orifice tube.
Most orifice tubes are placed in the high pressure line to the evaporator at the fire wall connection. You will have to empty the freon from the system to replace the orifice tube which is not very expensive (the tube, that is).
It does not have an orifice tube just a compressor and accumulator
Best way is to replace the entire line , alternate methode is to cut the orifice out of the line and replace it with an orifice tube repair kit. Personally i change the whole line.
sounds like there is no orifice tube in it. orifice tube should be located just before it enters the firewall at end of high pressure line
If you mean the orifice tube, it is in the low pressure line. If there is a hex nut in the line, you can separate the two parts and remove the orifice tube. If there is no nut, just a crimp, the line must be cut and a repair kit installed to contain the new orifice tube.
This is the escort page not the Taurus page.
you don't, the car has an expansion valve by the evaporator.
Where is the A/C expansion valve on the 1994 Lexus Es300
inside of the line that runs from the condenser to the evaporator. The orifice was not intended to be serviced separately, in other words, you are supposed to buy the whole line, but there are some aftermarket parts suppliers that have a service kit that you cut open the line, replace the tube, and clamp it back togther.