The Rear Axel for a 1969 Pontiac GTO is 60"
Newer GTOs are not one of my strong suites... It appears the axle stub refers to axles for independent rear suspension cars. Check out the link.
I know that this rear is a gm standard 10 bolt, and Pontiac used it in the 64-66 gto, tempest, and le mans.
the backing plate on the rearend has to come off and there are C -clips that you have to pull out of each axle where they mesh with the gears inside the rearend and then you can pull the axles out.
www.sunvisordepot.com.they are great!
3.46 for auto and manual transmission.
"66 rear fenders and '67 are not the same. Those are called Quarter Panels.
The GTO in Bandits was a 1967 GTO. From the front 1965-1967 GTOs look very similar. The tell in the film is the tail lights. Only the 1967 GTO broke the tail lights out into fours on either side of the rear of the car.
there is a yellow pull tab under the right rear headrest
far rear corner of the hood on the drivers side.
Just behind and above rear pumpkin? good luck
You should be able to use a 12 bolt. Check your spline count. Standard spline count is 30, you can change the axles to a 35 spline and gain as much as 89% strength. There are many vendors to help you with ordering the right parts. Let them know your use and horse power.