answersLogoWhite

0


Best Answer

first remove the tire and then you can remove the two larger bolts on the bracket that holds the cylinder and brake pads. The bolt size is either a 13/16 or 3/4 inch. Tap the rotor with a rubber mallet or hammer, if their are clips on the studs you need to remove them first and the rotor should come off and then slide the new one on over the studs and replace the clips if possible but not necessary. Next put the caliper back on and then replace the two larger bolts. You may have to open caliper cylinder by prying a flat head screw driver in between the pads and rotor then remove two smaller bolts which are 7/16 to 5/8 inch take out pads and replace with the new ones and shims if possible . make sure all bolts are tight as possible when putting back together also do not touch the rotors or brakes with dirty hands or gloves don't allow grease to get on these parts where the pads touch the rotors. will cause noise latter on.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace rotors and brake pads on a 1996 Chevy 1500 express van?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Why Are the brakes on your 2003 Chevy truck jerking?

You have a warped brake rotor(s). Resurface or replace the effected brake rotors.


How to replace front brake rotors on 2003 Chevy Malibu?

take the wheels off, unbolt the brake calipers and the pull them off and now you can just pull the rotors off.


Is it possible to replace one's own brake rotors?

If you are wondering whether it is possible to replace one's own brake rotors or not because you drive an older vehicle that need brake rotors replaced, then the answer is no.


Why is your Chevy Malibu shaking when you brake?

warped brake rotors, have them resurfaced.


Do you have to replace the brake pads when you replace the front rotors?

no but it is recomended.


Estimate to replace brake pads calipers and rotors on a Chevy G20 Van?

cost of parts 200.00 labor 125.00 total $325.00


Why does your Chevy truck front bounce when brakes are applied?

The front rotors are out of round are warped. Turn are replace rotors and be sure to replace the brake pads even if thay look good. I would also check the tie rods too.


When you brake your Chevy Trailblazer pulsates why?

The brake rotors are warped are out of round. Need to do a brake job and have the rotors turned are replaced. Be sure to install new pads and shoes.


How do you change the front brake rotors on a 1994 Chevy 1 ton dually 454 fwd?

Remove the tire and wheel from your 1994 Chevy. Remove the brake assembly. Tap on the rotors with a hammer or mallet. The rotors will slide off. Reverse the process to install the new rotors.


When do you need to replace brake rotor?

when needing brakes do you have to replace the rotors to on a s60r


Do you need to replace the brake pads if you are replacing the rotors?

depends on the condition od the pads. If worn or have groves etc from the rotors then replace.


How much will it cost to replace brake pads and rotors on a Honda CRV?

how much does it cost to replace brakes rotors on honda crv