Most cars and trucks today have what is called a serpentine belt which runs most accessories.They are very dependable and usually easy to replace. To decide if your belt needs replacing, simply look at the grooved side of the belt to see if it is cracking badly. A couple of cracks every 3 inches is normal, but if you see cracks every 1-2 inches I would recommend that you replace it. On most cars and trucks the procedure is basically the same. First off, get the correct belt by bringing your cars VIN number to the parts store(located on your cars dashboard) the parts store may need it. If there are two choices, get them both so you can complete the repair. Once you have the correct belt, take a minute to review how the belt runs across the pulleys and also check to see if your car/ truck has a underhood diagram of belt routing in case you need it. In most cases you will need a socket wrench or breaker bar with either a 3/8" and /or 1/2" head on it and possibly a short extension. Some models may require a wrench of these similar sizes.Now that you are ready to go to work, you will need to find the spring loaded tensioner which is generally located near the top of the belt path; it usually has a shinny pulley on it. Look at the tensioner and insert the tool into it and apply opposing pressure to release the belt.Now, simply install the new belt making sure it fits into the grooves on all the pulleys. Start the car to check it and you are done and you saved yourelf some money!
1999 mercury sable horn replacement
What is a gem module for 1999 mercury sable? And what does it control?
On a 1999 Mercury Sable : The transaxle ( transmission ) is located in the engine compartment , bolted to the engine
According to the 1999 Mercury Sable Owner Guide : ( 5W-30 )
On a 1999 Mercury Sable : Relay # 30 is the Powertrain Control Module ( PCM ) relay
According to the 1999 Mercury Sable Owner Guide : ( 60.6 litres / 16.0 U.S. gallons )
how to change water pump on1999 mercury sable
Ask at an auto parts store.
The ECM in a 1999 Mercury Sable is located on the inside of the vehicle on the passenger side. It is located under the kick plate.
How can remove the rear seat on a 1990 mercury sable
You can view the 1999 Mercury Sable owners manual online at : www . motorcraft service . com ( no spaces ) Click on Owner Guides
Inside the alternator.
According to the 1999 Mercury Sable Owner Guide : ( 60.6 litres / 16.0 U.S. gallons , all models )
These model years / designs are very different from each other and the doors are not interchangeable.
You can find a power steering diagram for a 1999 Mercury Sable in the owner's manual. You can also find it at certain auto part stores.
The 1999 Mercury Sable computer module can be located behind the passenger side dashboard. The dashboard will need to be removed in order to view the computer module.
There is a pressure release screw or bleeder on the power steering system in a 1999 Mercury Sable wagon.
Just replace it if you have not done so in the last 36,000 miles. or if you suspect it is clogged.
no coolent low oil
On a 1999 Mercury Sable : Open the drivers door , and on the latch pillar you will see an information sticker . One of the things it shows is the original size of tires on the vehicle from the factory
On a 1999 Mercury Sable : In the fuse panel by the brake pedal : ( # 17 is a 30 amp fuse for the front wiper / washer )
the owners manual