Spark Plugs and Wires
Mitsubishi Lancer

How do you replace spark plugs on Lancer 2002 engine?

444546

We need you to answer this question!
If you know the answer to this question, please register to join our limited beta program and start the conversation right now!

Related Questions

User Avatar

The 2008 Lancer uses a 4 cylinder engine, therefore it uses 4 spark plugs.

User Avatar

Disconnect the battery, remove the engine cowl, remove the spark plugs cables, boots and plugs on the drivers side of the engine, replace with new spark plugs and attach the boot and cables. Do the same on the passenger side of the engine, replace the engine cowl, and connect the battery.

User Avatar

Disconnect the battery, remove the engine cover, remove the spark plugs wires and boots, and remove the spark plugs. Put in the new spark plugs, replace the spark plug wires and boots, replace the engine cover, and connect the battery.

User Avatar

A Toyota Allion has 4 spark plugs. These spark plugs are not hard to replace, and can be found in the engine, under the hood. After 2008 models, they are harder to replace.

User Avatar

It is important to replace old spark plugs to keep a car engine running well. To replace them disconnect the battery, remove the cables, remove the old spark plugs, replace with the new spark plugs, replace the cables in the correct order, and connect the battery.

User Avatar

Underneath the plastic cover that has MIVEC written on it.

User Avatar

To replace the spark plugs from a 2004 Kia Sedona the plug wires ,must be removed from the engine. Unscrew the plugs. Properly space the new plugs and screw them in.

User Avatar

Disconnect the battery, remove the engine cover, remove the spark plug cables and boot covers, and remove the old spark plugs. Put in the new spark plugs, attach the boot covers, and cables, replace the engine cover, and connect the battery.

User Avatar

To fix an engine with no compression first try replacing the spark plugs. Remove the spark plug wire and then remove the spark plug. Replace the plug with a new one. Reattach the wire. Replace all of your plugs and see if your engine will fire.

User Avatar

on the 3.5 v6 take off the engine cover, unscrew the coilpacks and take out the spark plugs.

User Avatar

How do you replace the spark plugs on a Peugeot 307?

User Avatar

How to Replace spark plugs on 2004 cadillac deville Sls with 4.6 v8 engine

User Avatar

How to replace spark plugs in a 1989 jeep cherokee?

User Avatar

not necessarily unless after replacing plugs your engine misfires.

User Avatar

There are 6 spark plugs in a V6 engine.

User Avatar

No spark plugs are used in a diesel engine

User Avatar

if engine has 4 plugs buy 4 if engine has 6 plugs buy six

User Avatar

( 6 spark plugs ) with the V6 engine ( 8 spark plugs ) with a V8 engine

User Avatar

You need to take off the cover from your engine and then you will see a plastic cover with aprox. 6 screws you need to take out those screws and under that you will see the spark plugs

User Avatar

Spark plugs are a cheap and quick fix if one goes out. The cost to replace one on a 454 chevy engine however can differ depending in the spark plug brand.

User Avatar

Why open your fly when you can pee in your pants?

User Avatar

why is the spark plug full off oil

User Avatar

Flush and replace the engine coolant. Replace the engine timing belt or chain. Replace the spark plugs & wires.

User Avatar

you rotate the engine to get to the rear plugs but the front ones are easy to replace

User Avatar

It doesn't carry spark plugs but it has 6 spark plugs installed in the engine. The only internal combustion engine that does not have spark plugs is a diesel.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.