im not sure if you mean the bulbs themselves or the whole light assembly so here is answers for both:
for the bulbs ONLY: the easiest way to do it in my opinion as a mechanic is to remove the headlight assembly. to do this is a chore all on its own. there are two screws that hold each light in plus three that hold the top portion of the bumper on. all of them must be removed if its an 03+. for 00-02 only the screws on the light need to be removed and these lights generally slide right in and out once the screws are removed. on 03+ you have to pry the bumper some (not so much it breaks!) to get the light out. they WILL go back in but it takes some patience especially if you have never done it before. after the headlight is out you can look straight down and see the back of the fog light with two wires going into a plug. you grab the plug and twist it to the left. Dodge has a nasty habit of gluing these down so it may be hard to turn but it will break free with out damage to the car. simply slide off the old bulb and slide the new one one and reverse the process. there is another way to do this if you don't want to remove the headlights but the actual bulb is harder to get to. See remove whole light.
to remove the whole light: under the front bumper there are alot of small screws that hold a black plastic piece to the bumper and to the radiator bracket. remove theses and look up towards the fog lights there will be 2 nuts that hold them onto studs. remove the nuts and push the light in towards the car so it slides off the studs. i recomend that you remove the bulbs first to avoid damage to the wires (see above) but you can remove them before taking the light out as well or just disconect the wire. under no cercumstance should it hang by the wires. if you do this under the car without removing the headlights be prepared to get your hand cut up and twist your arm in all kinds of ways it should'nt be.
The video available on youtube can help you replace fog lights in a 2012 camaro, however, you can also take your car to the workshop for your convenience.
TAKE THE COVERS OFF THAT COVER THE FOG LIGHTS BY PULLING THEM OUT.gET A SREW DRIVER AND TAKE THEM OUT THATS IT.
The fog lights on a Chevy Malibu can be reached from under the car. Pull off the old lights and toss out the bulb. Replace with a new bulb and reinsert the light in the fog housing.
http://forums.maxima.org/infiniti-i30-i35/589286-how-remove-fog-lights-96-99-i30.html
form_title=Upgrade Fog Lights form_header=Replace your existing headlamps with a better and more efficient type. Is the vehicle already wired for fog lights?= () Yes () No Are they going to be installed in a low position or a normal position?= () Low () Normal What features would you like the lights to have?=_
It depends on the number that's on the fog lamp. It usually comes in H3 or H4
Take them out then put the new ones in
Pull out slightly on the headlight switch. If the fog lights do not respond you need to replace the switch.
Remove grill for better access. Then proceed to remove bulbs. The fog lights set inside casing. Unscrew them and replace bulbs. Return mechanism s and they should shine properly.
The fog lights can be accessed from underneath the car. Crawl under the bumper and find the fog light housing. Pull the old bulb off and replace the bulbs.
Fog lights
No, the fog lights have a switch.No, the fog lights have a switch.