The valve cover bolts need to be torqued to 72 to 84 IN-LBS
The firing order on a 1998 Elantra is 1,3,4,2
how do i adjust the handbrake of a hyudai elantra 1998 model
Is Hyundai own engine, known as beta engine
lost soulwhat kind of transmission fluid is used in 1998 Hyundai elantra,and where do you put the fluid
overdrive shut off
I have a 1998 Hyundai Elantra and had the rotors replaced, you will have to have a shop to do it because they have to be pressed off and then back on again with a specialized machine or tool. Of course unless you have that tool you can do it yourself. Good luck.
with the automatic belt tensioner..
Anything made after 1996 I think is OBD2.
pull it up on the front edges on either side
1-3-4-2 is the firing order.
It is located under the hood below or beside the brake booster.
I checked my owner's manual - it listed radiator capacity at 6L.
Click on the link to your right for the answer.
Dexron III automatic transmission fluid
there's no such thing as a Hyundai ''lantra'', its elantra If it's the same as Elantra try modifiedlife.com. They got free wiring diagrams for many makes and models. Sorry. There is a Lantra. It was released in Australia by Hyundai during the late 90s. There is a sedan and a sports wagon.
The speed sensor is a timy magnetic reed switch located inside the speedometer cluster in the dash. The reed switch is magnetically triggered by a magnet that spins in the speedometer cable.
Take it to a mechanic
try around left kick panel if not there mabye on passenger side
The PCV valve for a 1998 Monte Carlo should plug into the valve cover. Twist and pull it to remove and replace it.
This transmission does not have a modulator valve.This transmission does not have a modulator valve.
The head has to come off to replace a valve. That'a a pretty big job.