Want this question answered?
Replace the seat belt.
no
On the belt tensioner you will see a spot to insert a half inch drive breaker bar or ratchet to move tensioner off belt.
Replace serpentine belt on Chevy avalanche?HOW
no The Chevy Celebrity 4 cylinder engine doesn't use a timing belt, it uses a timing gear. To replace the gear it is necessary to remove the camshaft from the engine as it is a press job. To remove the camshaft it is necessary to remove the engine from the car.
It is no more difficult to put a drive belt on a 1985 Chevy Celebrity than it is in most other cars. Just loosen the driven device, move the adjustment in and remove the belt then replace in the reverse order. Of course if the belt you want to replace is the inside most position you will have to go through the process on the outer belts to get to the inner belts, but that is true on any vehicle.
2.5L 4 cylinder engines have a gears only, no chain. 2.8L V6 engines have a timing chain st
To replace the belts on your 1982 to 1986 Chevrolet Celebrity starting with the outermost belt: First take note of the locations of each belt so you will know where to put them back. Then loosen the adjustment bolt on each driven unit and slide inward to release the tension and remove the belt. It may be necessary to loosen the mounting bolt to slide the unit over. Repeat that procedure for each remaining belt. Reinstall in the reverse order. Rotation is not critical for this kind of belt.
Which belt? What year 350?
To change the serpentine belt on a Chevy Celebrity: 1. Make note of the routing so you can get the belt back correctly. 2. Use appropriate breaker bar or ratchet to release the tensioner then take the old belt off. 3. Put the new belt in place, releasing the tensioner to get the belt over it.
On some cars there is a sticker in the engine compartment with a belt diagram.
It does not have a belt, it has a chain.