Want this question answered?
Replace your heater selector switch
how do you replace ac heater knob in a 05 accent
The problem is either the blower motor resistor or the blower speed selector switch.
how do you replace the ac switch in the dash of a beetle 1999
I just replaced the front heater motor in my 99 Suburban, it worked great, now the heater/ac absolutely does nothing. Could the switch be bad, the motor, I am stumped and need help. Thanks Jim.
There is a resistor pack operated by the fan switch. It has failed. You need to replace it.
Check to see if you are getting power and ground to the blower motor - if so blower motor is bad. If no power possibly fan switch or selector switch Also check the blower motor resistor, found in heater plenum.
If the AC is Blowing cold and turn off and on, the AC/heater control switch is bad. Replace it on eBay for around fifty dollars. Work great now.
This could be due to a couple of things. The temperature switch is bad, the AC selector switch is bad, the AC compressor is not engaging when you turn the air on, or the AC system needs to be recharged. FriPilot
The AC switch operates the AC compressor and should have no bearing on your heater function. If your heater is not working properly, you may have a weak thermostat.
I have a 2002 Jeep Grand Cherokee Laredo that was doing the same thing. The problem was a faulty ac/heater switch. You put the switch on ac, compresser engages, lines get cold and frosty, but only hot air is coming out of the vents, because the switch has changed back to heater even though it shows ac. The cure is to have the center panel which contains the ac/heater switch, fan speed switch and temperature control replaced.
fan speed control switch is bad. Replace it as long as the other speeds work fine.