how do you replace 1997 alternator belt
I'm unable to create diagrams directly, but I can guide you through the process. To replace the alternator on a 2000 Kia Sephia, first disconnect the negative battery terminal. Then, remove the serpentine belt by loosening the tensioner, followed by the electrical connectors and mounting bolts of the alternator. Finally, install the new alternator by reversing the steps, ensuring all connections are secure and the belt is properly tensioned.
Two reasons why your alternator belt is breaking is: Your alternator belt is too tight, or you are using a belt that is old and worn. I cannot answer your question fully without seeing the vehicle. Sorry.
To replace the alternator belt on a Citroen Berlingo, you have to locate the tensioner. You can loosen it to replace it.
BeltsYes, you must remove all of the belts to replace the alternator belt. The compressor belt first, then the power steering belt then the alternator belt.
You need to losten the screws on the alternator to losen the belt, then you can take it off, and replace it.
replace alternator belt
1. Suspect the belt is loose. Tighten it or use belt dressing. 2. Bearings are worn out on the alternator. Replace the alternator. 3. Poor workmanship on a rebuilt alternator. Replace the alternator.
Remove your idler pulley first. it is the pulley right next to the alternator.
Remove the power steering belt first then the alternator belt will go on.
To replace the alternator on a 1997 Ford Fiesta Zetec MK5, first disconnect the negative battery terminal to ensure safety. Remove the drive belt by loosening the tensioner, then detach the electrical connections from the alternator. Unscrew the mounting bolts to remove the old alternator, and install the new one by reversing the process. Finally, reattach the drive belt, reconnect the battery, and check the alternator's operation.
To replace the alternator on a 1997 Nissan Pathfinder, first disconnect the negative battery cable to ensure safety. Then, remove any components obstructing access to the alternator, such as the air intake duct. Next, loosen the serpentine belt by adjusting the tensioner, and then detach the alternator's electrical connectors and mounting bolts. Finally, install the new alternator, reconnect everything, and ensure the belt is properly tensioned before reconnecting the battery.