1. disconnect your battery 2. remove belt (draw diagram before removing for easy replacement) 3. remove connecting wires from the alternator 4. remove all the bolts connecting the alternator 5. put new alternator in position 6. bolt into place 7. reattach wires 8. replace belt 9. wash your hands 10. have a beer
The alternator on a 1986 Honda Civic is located in front of the engine. Unplug the battery and remove the alternator belt. Loosen the alternator bracket and remove the plug to the alternator. Replace the unit.
bottom front of engine
My 1986 Olds Cutlass Calais doesn't have a serpentine belt. It has a separate alternator belt. How do I change it?
Yes, you do.
go to OBD codes.com they have them for everything sandi
ECM is a common problem with this type of car engine
if you replace the alternator will you also be replacing the voltage regulator
The voltage regulator is an integral part of the alternator. I would recomend replacing the alternator.
Frist disconnect negative battery
Lap and Belt
There are two bolts on the bottom of the alternator that you can't see but you can feel them, these are the pivot bolts, remove them. Then remove the adjustment bolt on top of the alternator. Remove wiring from back of alternator. Reverse instructions for install.
Bad ECU, replace.
1-6-5-4-3-2 click the link for a photo of the wiring.
use dextron II or power steering fluid, this age of car was not picky
need diagram for 1986 Nissan truck alternator
Phi Beta Delta was created in 1986.
How do you install an alternator belt on a 1986 GMC s15 pickup truck
In the lower part of the armrest, there are two holes, at the end of these holes there is a phillips (cross) gead screw, remove those and the armrest should come out.
Delta Lambda Phi was created on 1986-10-15.
Oldsmobile used 307s in those days, not 305s - the 307 had 140 hp
I unhooked wires on alternator but did not mark wires