How do you replace the alternator on a 2000 Chevy S-10 2wd 4 cylinder?
* Disconnect the negative battery cable.If the vehicle is equipped with a delco loc 2 or theftlock audio system make sure to have the activation code before disconnecting the battery. * Remove the drivebelt * Label and detach the wires from the backside of the alternator * Remove the mounting bolts and separate the alternator from the engine
Being located on the top of engine, it is easy... 1. You need to disconnect the battery neg- cable. 2. remove the serpentine accessory belt 3. disconnect wires at the alternator 4. remove bolts holding the alternator and remove alternator, might have to use a large screw driver/prybar to get out of the bracket 5. reverse removal steps to install new alternator
How do you connect the hydraulic to the clutch slave cylinder on a 2000 S10 chev pickup 2.2 4 cylinder?
There is a pulley directly underneath your alternator that has a nut on the back of it. You'll need a wrench to put on it and push down to get slack on the belt. After removing the belt there are three bolts (two in the front and one on the back) that need to be removed. Then disconnect the wire harness and you may need something to pry the alternator out of the bracket and…