1. block rear wheel so it won't roll; 2) loosen lug nuts; 3) jack up wheel with jack under cross frame; 4) place jack stand under spring support & lower jack to rest PU on stand but keep jack in place holding some weight; 5) remove lug nuts and wheel; 6) remove the 2 bolts that hold the brakes to the brake mount, with wire hook brake onto spring; 7) remove screw(s) if so equipped from front center of rotor then pull rotor off. That's it if I recall correctly.
1500 or 2500???
Change front brake rotors on a 1998 Hyundai Accent?
It's called "brake chatter", and it's caused by warped brake rotors. Replace the rotors and the problem should go away.
Tap on your 1998 Mazda brake rotors with a hammer or mallet until they become loose. The brake rotors will simply slide off.
It's less than 2 hours work - depends on local labour cost.
The minimum thickness for a 1998 Chevy Tahoe's rotors is 30mm. Rotors must be replace when they fall below this thickness due to reduced braking power.
use new pads and shims, repack wheel bearings and replace grease seals, set factory bearing tension, and resurface/replace rotors.
remove your tire,take off your brake assembly,two hex head bolts,remove old rotor,and put new one on.
You have not set and adjusted them correctly.
Front or rear rotors and 2 wheel or 4 wheel drive, it makes a difference.
You can try this method thanks to the video below...
how do you change a brake booster valve to a 1998 Pontiac transport