Place a small flat magnet over the hole mimes been working for 3 years now
any information on 87 Honda accord with the clutch/
Pump the pedal to the floor and then screw on the cylinder.
To adjust the clutch on a 1991 Honda Civic DX, locate the clutch cable adjustment nut near the clutch pedal. Loosen the lock nut and turn the adjustment nut to increase or decrease the cable tension; typically, a slight amount of slack (about 1-2 mm) should be present at the pedal. Once adjusted, tighten the lock nut and ensure the pedal engages smoothly without slipping. Finally, test the clutch operation to confirm proper adjustment.
There is not speedometer cable on a 1996 Honda Civic. There is a throttle cable. Top replace this unhook it from the throttle body and gas pedal. Hook on the new cable to snake it through the firewall. Properly hook the throttle cable to the gas pedal and throttle body.
behind the clutch pedal.
To replace the clutch cable on a 2004 Honda Element, first, ensure the vehicle is in gear and safely elevated. Disconnect the cable from the clutch pedal inside the vehicle and from the clutch release fork in the engine bay. Remove the old cable and route the new cable through the same path, securing it to the pedal and the release fork. Finally, adjust the cable tension as needed to ensure proper clutch operation.
You need to replace to whole Pedal
A 1995 Honda Accord clutch pedal switch is located directly under the clutch pedal. This switch stops the car from starting with depressing the clutch. This helps avoid accidents.
It is hydraulic. There is no adjustment, it self adjusts.
How do you install a cluch pedal spring on a 93 honda accord
answer remove 2 clutch pedal bolts and pin,remove the reservoir unscrew the fluid pipe,install the new one then bleed it very well
replace the bushing where the clutch pedal attaches to the master cylinder arm.