answersLogoWhite

0

answer

remove 2 clutch pedal bolts and pin,remove the reservoir unscrew the fluid pipe,install the new one then bleed it very well

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do i replace a clutch master cylinder in a 1996 Honda civic?

how difficult is it to replace the MS on a 1996 Honda accord


If i replace slave cylinder will that make my clutch disengage and engage correctly?

if i replace slave cylinder in 1994 Honda civic ex will this make my clutch disengage and engage correctlyanswerchange master cylinder and slave properly then bleed the system properly.


How do you install a slave clutch cylinder for a 1994 Honda civic ex v-tech?

The slave clutch cylinder on a 1994 Honda Civic is located inside the engine compartment. On the driver-side close the firewall. The clutch fluid should be drained. Remove the mounting bolts and clutch lines to replace the slave clutch cylinder.


Will a 1995 civic transmission fit in a 1990 civic?

No, the 1990 civic transmission is a cable operated clutch and the 1995 civic is a hydraulic operated clutch. So unless you rig up a hydraulic clutch system(Master cylinder, pedal, slave cylinder, lines...) it will not work. But a company called "Hasport" makes a bracket that has a cable attachment that operates the clutch engagement and disengagement.


Where is the clutch slave cylinder fluid located on a Honda Civic?

The brake fluid for the entire system is added in the master cylinder container. The slave cylinder does not have its own reservoir.


How do you replace the brake booster on a 1990 Honda civic?

The brake booster on a 1990 Honda Civic is held in place with several mounting bolts and the brake master cylinder. Remove all the mounting bolts, vacuum lines and the master cylinder. Go underneath the dash and remove the plunger from the brake pedal. The booster will fall out. Replace the unit.


Do you need to bleed the abs modulator on a 2001 em2 1.7 civic if removing the master cylinder to replace seals if so is the bleed a specialist job?

no. on a 2001 em2 1.8 civic


What needs changing when a 2001 Honda civic dx manual starts but does not want to go into gears?

If you check the reservoir for the hydraulic clutch you may find it empty. If so the clutch master or the slave cylinder is leaking and must be replaced.


Clutch is sticking to the floor of your 1998 Honda civic only sometimes?

The clutch sticks to the floor sometimes if the pedal does not return to pressure plate, which has metal fingers arranged concentrically. YouÊneed to check the master clutch cylinder container to see if the fluid has all leaked out.


What does it cost to replace a clutch on a 04 civic?

Civic 04 as per dealer parts + labour = $916


How do you bleed a clutch on a 1993 Honda Civic?

Pump the pedal to the floor and then screw on the cylinder.


How much does it cost to replace a clutch master cylinder on a Honda civic?

Today is 8/13/10 (My Car:2004 Honda accord v6 manual Coupe) I just got my clutch master cylinder replaced, The part run roughly around $70 to $100. The labor fee varies, But everything together out the door cost me $230 that's including labor. Its really not that bad but for a student that needs to buy books and etc ITS SUPER BAD.answers:clutch master cylinder,the seal,and the fluid rubber tube,$114.00 hondapartsdeals.com all genuine Honda parts,another 90,000 miles for it