Hey Joseph==If you are really interested in changing the engine, go to the parts store and get a manual on your car. It will tell you how. GoodluckJoe
You cannot replace a 94 V6 3.0 Dodge Caravan engine with a 4 cylinder 2.4 Plymouth Voyager engine. The reason is because the engine is too small.
The bolts on a 94 Dodge Intrepid valve cover need to be very tight. You should tighten to 12 N*m or 105 inch pounds.
on the intake manifold, close to the thermostat housing, which is at the end of the top radiator hose on the engine.
how do you program a keyless remote for a 94 Dodge Intrepid. I battery died and now the horn keeps going off
To replace the thermostat on a 1994 Dodge Intrepid, first ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose connected to the thermostat housing. Unbolt the thermostat housing, take out the old thermostat, and clean the mating surfaces before installing the new thermostat with the spring side facing down. Reassemble the housing, reconnect the hose, refill the coolant, and check for leaks.
The intake would be the large aluminum housing that U'll first view after raising the hood.It sits directly on the top-middle of the engine.
Gee, which engine do you have? a 3.3L the alternator is on the top, and totally easy to get to. a 3.5 is lower and harder to get to... What are you talking about? The 3.5L is very easy to get to--Its near the top as well.
Should be the same as my 94, pretty much directly in front of the driver. Held on by 3 bolts.
TO REMOVE A BROKEN DIP STICK USE NEEDLE NOSE PLIERS OR A MAGNET.
Small screwsriver pop the metal speaker covers off..easy access to speakers from there
Buy a kit at Wal-Mart or auto parts store comes with instructions
What all is involved in replacing a a/c evaporator in a '94 Dodge Dakota?