After jacking the car up and removing the front tires, remove the wheel-bearing dust cap, remove cotter pin, then remove nut, turning it counter-clockwise, then remove the large washer. Now, tap the top of the brake drum with the palm of your hand, and the front bearing should pop out. Then slide the brake drum off. If the brake drum does not come off, you will have to turn the brake shoe adjuster inward. The brake shoe adjuster is located in the slot in the back near the bottom ball joint. Pull brake drum off.
To replace front brake pads on a 2002 Ford Mustang safely raise and stabilize the vehicle. Remove the wheels and caliper. Slide out the front brake pads and replace with new units.
The front have pads, and the back have drums. If you are needing to replace them, they cost around 60. What is it you needed to know?
the first thing to try is to tap on the drum with a rubber mallet. if that dont work then adjust the adjuster on the back down to losen the pads.
How to replace front brake pads on Mercedes s430
It may fit but not without modifications . Also consideration must be given to the size of front brake drum. If the original engine was 6 cylinder the front brake drums will be 9" and will need upgraded to the 10 inch system that was factory for the heavier V8 engines.
no but it is recomended.
Pads on front. Drums on the rear.
A car what has front disc and rear drum brakes have front brake pads and rear brake shoes.
replace front brake discs and pads.
remove rear brake drums
With tools.
is it disk up front drums in back