Want this question answered?
Four door sadan
The ownners manual does detail the process...do you have it?
To replace a broken garage door spring, you first need to determine the type of spring used; either torsion or side-mounted. To determine the type of spring, and then to replace the spring, there is a very good website that has all of the information available to replace and adjust the door springs. The website is at http://www.naturalhandyman.com/iip/infgar/infgar1b.html.
on a 1994 Lexus es300 is the connecting rods and door lock mechanism cpmpatable with the 1994 Camry parts Few parts are exchangeable between the two makes. The Lexus RX 300 and ES 300 were both based on the Camary platform.
The key has a button which controls the locks on the doors, press once for drivers door and other doors, if key does not work check battery in key.
take out the old speakers and put in the new ones.
THAT usally means somebody tried 2 open your door with a slim-jim & knocked OFF the linkage inside the door which means the door panel needs 2 b removed 2 repair it.
Your local auto parts store can sell you an inexpensive tool to remove and replace that door detente spring. Other hinge parts such as the pin and roller for the door detente and hinge pins and bushings are also available.
http://www.ecklers.com/assets/pdf/A4301.pdf?
The spring holding the door button in place has fallen out. Remove the door handle and replace.
Hi What you have are worn bushings on your door pins . I just replaced mine. You can purchase the bushings at a any gm garage the spring in the door has to be removed it is a bugger! Unless you have a door spring commpression tool (i purchesed one at my local auto parts store $18). These bushings wear and crack. Support your door , remove door pins with a pin punch, replace the bushings, replace pins ,replace spring. Hope this helped!
http://www.youtube.com/watch?v=lYrEBvjHb5g