My 92 S-10 fuel filter is on the frame of the truck somewhere about the middle on the drivers side. The filter has a clamp on it holding it to the frame and the inlet and outlet lines are flare connections. I think they were either 5/8 or 9/16.
how do you replace a CV joint on a 1992 Chevy pickup?
I would replace the ignition module in the distributor.
You don't unclog the fuel filter, simply replace the whole canister with a new one.
1992 Chevy trucks did not have a CAM SENSOR. They had a distributor.
You will need to drop the transmission pan and replace the gasket. While you're at it, replace the filter and clean the pan.
There are several different blades, Go to the parts store and most will show you how to replace them
You cant
find fuel tank under truck and should see two steel lines running to from tank. fuel filter will be inboard of frame ...on Chevy should be about the size of pop can or smaller with preasure flare fittings on either side of filter.
yes
Symptom of bad fuel filter= stalling when slowing down to stop at lights or stop signs.
Not from the factory, it doesn't.
No.