Fuel Pumps
Chevy Camaro

How do you replace the fuel pump on a 1995 Chevy Camaro?


Top Answer
User Avatar
Wiki User
2015-07-15 20:42:00
2015-07-15 20:42:00


It's a pretty big job. first you have to relieve fuel system pressure. disconnect negative battery cable. remove the fuel tank. disconnect the fuel feed,return and vapor line from the tank. the fuel pump is inside the tank.remove the 4 or 5 nuts holding the assembly. lift the unit from the tank.( it is very delicate. do NOT bang it against the tank) check the rubber gasket around the opening in the tank. if cracked, dried or deteriorated, replace it.remove the strainer from the fuel pump and clean or replace it. lift locking tabs to release fuel pump cover. disconnect electrical connectors at the pump.disconnect fuel line from the pump. separate fuel pump from assembly. installation is the reverse and reinstall into tank and tank back into car. Don't forget, to drop the tank you will have to take down the muffler or take down the whole exhaust system.


Related Questions

User Avatar

remove neg battery terminal, and the gas cap then replace the filter. Its under the vehicle towasds the gas tank

User Avatar

first check to see if your getting spark, or fuel

User Avatar

The fuel pump is in the gas tank, you have to take the tank down to replace it.

User Avatar

I think that one just has to sit for an hour for the fuel pump to start working again, that is assumming, of course, you don't trip it again....

Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.