it is easier to replace the whole headlight unit (as the glass is sealed to the body), but, if you have just the glass... remove the grill (3 screws), remove the headlight unit (one pop-up, 3 small bolts), place headlight unit on workbench, remove 3 retainer clips, cut sealant around glass, remove glass, apply new sealant to cleaned surface, press glass in place, reverse the above procedure...
or just buy the whole thing off ebay ($89)
You have to replace the entire headlight assembly not just the cover.
Forget about the Toyota; Buy American.
Sell it!
If you're talking about the headlight, the "lens cover" is not a separate part, you need to replace the whole headlight assembly.
Truck headlights can be found at your local auto supply store. Unscrew the cover for the old headlight, remove it and then remove the old headlight. You will need a screwdriver and possibly a wrench for this. Next, replace the broken headlight with the new one, and replace the headlight cover. Lastly, check to make sure the new headlight works.
One hour
the glass cover on the headlight is not servicable, they are glued during assembly. you have to replace the entire headlight globe or headlight assembly.
Open Hood. Remove the cover from the headlight by prying up the keeper. Remove the metric 13 nuts holding the headlight in. Take out headlight and replace the bulb. Reinstall the headlight and reinstall headlight and cover.
AnswerHow to replace the headlight (low beam) on a Toyota Corolla 2003? To replace the entire headlamp assy you must remove the bumper cover. There are fasteners across the top, inside fender skirt and along the bottom and also a few clips inside the grill that are accessible from underneath. Three bolts fasten headlamp assy to the radiator support and there are three quick electrical connections.
how to replace valve cover gasket toyota rav4 2001
There aren't headlight covers, it all one unit. One of my lens was cracked and I had to replace the whole unit.
Yes you can just replace the headlight bulbs. First you have to take out the cover by the battery. Then unscrew the cover by the radiator and simply lift it up to take it off. The light bulbs are visible at this time.