Headlights Tail and Brake Lights
Chevy Beretta
Ford F-150

How do you replace the headlight bulb located on a 1994 Chevy Beretta?


Top Answer
User Avatar
Wiki User
2015-07-15 20:02:28
2015-07-15 20:02:28

lift the plastic cover twist the old bulb out unplug it reinstall


Related Questions

how to replace a 1990 Chevy Beretta battery

The bulbs are located for the headlights under the hood of the car.

Remove the headlight connector from the back of your 2002 Chevy Monte Carlo headlight. Take hold of the lightbulb, push in and turn at the same time, to remove. Reverse the process to replace the new headlight.

I am trying to find the 1988 chevy beretta computer module and where is it located?

There are two clips on the wall that holds the headlights. Push the clips away and pull the headlight housing out.

The headlight fuse located on a 1995 Chevy Tahoe is under the hood. It is located in the fuse box on the passenger side.

the headlight assembly needs to come out in order to replace the bulb.

more then likely w/ no more info then is provided there is a silver rod on top of the headlight pod you slide to the side then the whole light will come out and you can replace the bulb and reinstall.

Open the hood, remove the two locks that hold the headlight assembly in place, with the two locks removed you can wiggle the headlight assembly out and gain access to the back side of the assembly to remove and replace the headlight bulb.

It is built into the headlight switch.

It is located inside the fuel tank. You need to drop the entire tank down to replace. in the bottom of the gas tank.

Go to autozone.com they have this information on their website.

Go to autozone.com. They have this information on their website.

The 1994 Chevrolet Beretta thermostat is located on the front of the engine. You can follow the top radiator hose directly to the thermostat housing. The thermostat will be in the thermostat housing.

The bulbs unscrew from the back of the light assy. sometimes you have to remove it to get to the back.

there are actually no screws. pop the hood and look for the plastic tabs above the headlight...one on each side of the headlight. pull them straight up and voila'.

If you remove the headlight assembly you will have access to the turn signal bulb.

if its like my truck you have to take the grill and the whole headlight assembly out to replace it good luck

How do i replace the headlight switch on a 03 trailblazer in detail. Such as what needs to be removed befor the switch is installed and with what tools .

where is the freeze plug located on a 1992 Chevy beretta and I need a picture on it also

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.