my husband and i just finished doing that... get ready for a hard time... its under the dash against the fire wall! you need to remove the entire interior from the center concil forward!!! it is really a pain but once you get to it it is easy from there, make sure you drain your coolant before disconnecting it... it makes a mess inside the car if you forget (we did) make sure you keep and label all the screws, pieces and such as you take the interior apart... they only go back together one way! trust me on this and save yourself a big headech! good luck
I need to know how to replace a heater core in a 1992 GMC Jimmy?
replace heater core on 92 buick century
It is not a direct fit.
i need to know how to replace the heater core on my 1992 s-10 pickup
I have a 1992 Dodge Spirit and it doesnt have an Egr Valve, but that's for the basic spirit, if you have an es, or anything, it will be located on the Intake Manifold. Its not hard to spot cause they usually say EGR across the top of it.
front wheel drive
Remove wheels Remove caliper mounting bolts Slide caliper off rotor Rotor should slide off hub
You add transmission fluid down the transmission dipstick hole.
remove the entire dashboard.
It is in the fuel tank.
You must drop the fuel tank.
Well I don't know about yours, but my owners manual for my 1992 Dodge Spirit with a 3.0L V6, 3-speed automatic transmission says that it has a 60 L tank. Hope that helps.
The heater CORE is a big job. Get a manual on your car to do the job correctly.
You probably need to replace the crankshaft seal
In front of the right front corner of the fuel tank.
lots of screws, lots of time, and a little prying.
Just ahead of the rear axel under the car
It is under the housing that the upper radiator hose hooks to on the engine
No, it is just in front of the tank.
under the housing where the upper radiator hose hooks to the engine
It is inside the engine, driven by the timing belt.
It is the plate in the disributor under the cap and rotor.
free diagram step by step at www.jeep4x4center.com
Remove the water supply hoses from your 1992 Chevy S 10 pickup truck heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.