answersLogoWhite
Heater Cores and Blower Fans
Toyota Trucks and SUVs

How do you replace the heater core in a 1993 Toyota pick up 22r?


Top Answer
User Avatar
Wiki User
2015-07-15 21:03:16
2015-07-15 21:03:16

You'll have to drain your coolant and disconnect the two coolant hoses that go to your heater core at the firewall. Remove the 2 bolts you see between the hoses on the firewall. Inside, you'll have to remove you entire dash. The support bar that runs from door to door needs to be removed. From here, the linkage from the controls needs to be removed, the screws securing the heater core housing to the rest of the ducting and A/C core need to be removed. There are a number of nuts that must be removed at the inner firewall as well. The heater core housing is 2 piece. Unscrew the retainer screws and separate the 2 halfs to expose the core. Good luck!

Related Questions

User Avatar

your better off asking if its worth it its a lot

User Avatar

Passenger side, near the firewall. It is not difficult to replace, it is just very difficult to get to.

User Avatar

The 1993 Ford F1 50 pickup truck heater core can be replaced by removing the water supply hoses. Remove the heater core retaining bolts. Reverse the process to replace the new heater core.

User Avatar

You can find the heater core behind the kick plate in your 1993 Acura Legend. Remove the water hoses. Remove the heater core retaining bolts. Reverse the process to install the new heater core.

User Avatar

To replace your heater core on a 1993 caprice, you will need a screwdriver, a socket wrench, and a weather seal adhesive.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.