the blower motor is under the hood, passenger side, up high behind the alternator in the firewall.
i am changing this today on my '92 corsica. unfortunately, after loosening it and trying to take it out i learned that the alternator will have to be removed first as there is not enough clearance.
in these particular cars the alternator has no range of motion as the belt tensioner is separate so it will need to be removed first.
you simply need to disconnect the ground and the power wire first by gently pulling them off. then loosen the (qty 5 or 6) 7mm screws that hold the motor in and it will come right out.
see the answer for how do you replace heater core 96 jetta its the same good luck and god speed
Easy to replace. Hard to get to.
on mine i just changed the o2 sensor located in the front by fan
How do u find a heater control valve on a 96 Ford e150 4.9
A 96 Corsica uses OBD2 as required by law for 96 model years. Use an OBD2 Scanner.
Up behind glovebox on passenger side held in with 3 screws.
You need to replace the heater coil !
between 600.00 and 900.00
behind glove box.it is a dog
yes the entire dash has gotta go
You can replace it with '94, 95 and some 96.
The brake lines on a 96 Corsica can be fixed by replacing damaged sections with new lines. This will improve braking and prevent catastrophic failures.