loosen the clamp holding the hose on to a fitting and pull the hose free.
specs on how to replace a heatercore on a 1993 ford explorer
how do you change the heater hoses on 1993 chey lumina 3.8 liter
You can find the heater core behind the kick plate in your 1993 Acura Legend. Remove the water hoses. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Drain the water from your 1993 Chevy Lumina cooling system. Remove the water supply hoses to your heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Under the dash board on the passenger side. You can find it easily by looking for two hoses (under the hood) that connect to the heater core right at the firewall.
Remove the water supply hoses from your 1993 Chevy Corvette heater core. Some water will drain out of the hoses and the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Heater hoses on a 1993 Lincoln Continental are located on the heater core behind the dashboard. There is no real easy fix. It includes quite a bit of labor.
There is an aftermarket kit from HeaterTreater that makes this job a breeze. Check out the product at heatertreater.net
Chilton's says to remove hoses from the 2 connectors inside engine compartment and remove the dash panel and lower panel. Then reach inside and pull the heater core out.
Disconnect heater core inlet and outlet hoses - couple them together
follow the 2 hoses that go into the firewall-drivers side hose should be the heater core--on the 95 T100 it is located behind the controls for the heat and air--
under the passenger side behind glove box the is a panel you must remove be careful for wires remove panel to display heater core remove hoses from under hod and then pull heater core out from inside passenger side