The door is very heavy so I have supported it when I have replaced the hinges. If I recall correctly you need a punch and hammer to pound the old one out from the bottom (one at a time). Then tap the new one in from the top. I have run into problems on some vehicles with replacements being to long and having to cut them just a bit.
by using only the information given, your answer is to replace the lower door hinge pin and bushing.
The '90 camaro has three bolts that hold the door hinge to the body and I believe three that hold the hinge to the door. The easiest way I've found is to score the position of the original hinge location and remove the bolts with the appropriate wrench with the door open. Be sure to have the door supported because it will try to sag. Once the new hinge is in place, align it to the original hinges location and tighten your bolts down.
need to replace door hinge pin on 189 mitsibushi Triton tray back
You can replace the top door hinge with bottom hinges on the 1992 as long as the hinge is for the cab doors. The hinges for the tailgate would not work on the doors.
http://www.bodyshopzone.com/archives/mechanical/door/hinge/pin_replace_1.html
jack the door up on the end of it and unbolt the hinge and replace with the new one.
you might need to replace the hinge pins.. or the complete hinge
You have to replace the whole hinge assembly, they don't make a hinge pin kit for the Thunderbird.
To replace a cabinet hinge, you must first remove the screws that attach to the door with either a screwdriver or a drill with screw bit. Next you want to remove the cabinet door. Once you have removed the door, remove the hinge from the cabinet. You can then attach a new hinge. A nice tip is to have a partner hold the door while you screw the hinge back in place.
To fix a car door that is sprung due to a bent or damaged hinge, the best thing to do is replace the hinge. If the hinge is welded and not bolted to the vehicle, the entire door will have to be replaced.
need to replace door hindge pins and bushing,how do we get door off safely.
To replace the door hinge pins on a 1997 Jimmy you will need to open the door up. Place two jack stands on the front and back of the door's length at the bottom portion of the door for support. Remove the damaged hinge pin with the proper socket. Place the new hinge pin in place and secure it.