Want this question answered?
We are replacing the ignition switch on a 1976 ford F150 Need some help - give us directions
How to drill out ignition switch on 1985 ford f150?
The ignition switch is usually mounted to the steering column and is operated by a linkage rod. NOTEOn column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch: * Remove the ignition switch wiring harness. * Unbolt it from its position. * Bolt the new switch into position. * Attach the witing harness.
The ignition switch is usually mounted to the steering column and is operated by a linkage rod. NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch: * Remove the ignition switch wiring harness. * Unbolt it from its position. * Bolt the new switch into position. * Attach the witing harness.
how to replace an oil pan that goes to a ford f150 1993? how much does the pan cost,and can you show a picture of it?
Posible relay problem
What question
Could be the ignition module. It's attached to the side of the distributor.
The actual problem is the starter continues to turn after key is turned off and pulled out of ignition.
no. Make sure wiper is in "OFF" position before you turn off your car.
Ignition relay is probably shot. It is in the power distribution block in the motor comprtment.
take off the distributor cap see what you find.