you have to pull the gauge cluster out of the dash and disconnect it from the wiring harness. to do that you have to remove the trim peice that encases it. once you have it out you can remove and replace the bulbs as they are either quarter turn or half turn (i forget) mounted. be carefull when doing this as the electrical board is exposed. Try not to touch it, i did mine in about an hour..i have faith that you can do it.
Definetly not.
how do you replace head lights on my 1999 oldsmobile alero?
Untwist it with pliers.
replace fuse
how do you replace backup lights on 99 grand am?
Your dashboard lights suddenly not working is almost always your indication that your taillights are out. If the fuse for your taillights is blown and you replace it, your dash lights should be fine.
instrument panel or controls?
how do you replace 1999 Toyota corolla corner light - passenger side
your stop light switch may have gone bad. it is located on the brake pedal under dash board. if the tail lights turn on when you turn on your lights then the problem will most likely be the switch '''(easy to replace)'''
There is a panel end of the drivers side dash and also a fuse box under the hood on the drivers side (its a black box with instructions printed on it , unlatch and lift up lid).
There aren't headlight covers, it all one unit. One of my lens was cracked and I had to replace the whole unit.
The taillights on a 1999 Kia Sephia are replaced through the cars trunk. Remove the plastic covers from the light housings and replace the bulbs.