If you are referring to the "turn signal, cruise control, wiper assembly switch" you will need to do the following.
Disconnect Battery, Remove lower valance under steering wheel, disconnect wiring under steering wheel, ie air bag, and main connector to multi switch. Remove out trim ring around base of steering wheel, remove screws holding multi switch and un-thread wiring from steering column. Assemble all in the reverse.
You will need to remove the ignition switch retaining ring in your 2002 Chevy Astro Van. Slide the ignition switch out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install the new ignition switch.
It is quite simple to replace the four-way flasher relay switch in your 1986 Chevrolet Astro Van. The four-way flasher relay switch simply plugs in and out.
what is an ignition actuator i work on Chevrolet and have never heard of it are you talking about the switch
The 1997 Chevy Astro fuel relay switch is located on the firewall in the engine compartment. The fuel relay switch will be in the center of the firewall.
On top of the steering column near the firewall under the dash. There will be a metal rod going into the bottom of the switch.
How do i change the window on a 95 chevy astro van
can I get a diagram to replace vacuum hoses ona 986 chevy astro van
When the brakelite switch fails it fails to on. Replace the brakelite switch. Located under the dash on the brake pedal arm. You will see a push switch that is released when the brake is pressed. Just replace that switch.
yes
If you need to remove your ignition switch, you should consult your owners manual. Check for a guide on how to remove and replace and follow the instructions.
how to replace a center link on Chevy astro van 1994 suspension
johnny frank