answersLogoWhite

0


Best Answer

It is easy, as long as the door frame has no damage. Remove the black plastic trim piece from inside on the door panel directly opposite the door mirror. It snaps free and with some wiggling you can remove it to reveal the 3 nuts and bolts holding the mirror assembly in place on the door. You will also see the electronic connector(for the mirror) that unsnaps easily. There are two types of connector depending on the wiring of your car. One accepts the folding heating mirror(seven wires) and the other is for the fixed mirror (four wires). If you have the seven wire connector you can replace the mirror on your 07 Altima with a folding Heating mirror Even if your car did not come with it in the first place. It is a direct plug and play replacement. I got mine from Ebay and did it myself - I did not color match the exterior and just left it black.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace the passenger side view mirror on a 2007 Nissan Altima?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How would you replace the driver side power mirror of a '99 Nissan Altima if the electrical connections are intact?

The mirror is held on by bolts on the inside of the door.


2004 Nissan altima Passenger side mirror broke at the base Is it possible to use the skull cap on a new mirror Thanks in advance?

I was able to do it easily on my 2005. If the mirror is anything similar it should be no problem at all.


How do you replace passenger side mirror on Nissan Xterra?

Replacing the passenger side mirror on the Nissan Xterra involves prying the housing cover loose to expose the fastener. Gently popping out the mirror assembly and disconnecting the power connections. Now reconnection and attachment can be done.


How do you reset the compass in a nissam altima?

How do I go about restting the mirror-based compass in a 02 nissan Altima?


Why is the Nissan altima's left wing mirror on left-hand drive cars convex?

The passenger's side mirror is at a different convexed angle to help reduce or eliminate the "blind spot" on that side of vehicle


How Replace mirror in Nissan Maxima 2005?

how do i replace drivers side mirror Nissan maxima 2005


How do you replace the driver side mirror on a 2005 Nissan Maxima?

replace 2005 Nissan maxima side mirror


How do you replace a passenger side mirror on a 1998 Nissan maxima SE electric non heated?

To replace the passenger side mirror on the 1998 Nissan Maxima SE, first remove the door panel inside the door by releasing the clips below the panel and by unscrewing the handle screws. Then, remove the trim panel that covers the mirror mount inside the vehicle. There should be at least 4 screws. Release the wires from the old mirror and take the part off of the car. Add the new mirror and connect the wires. Replace the screws and the door panel.


How do you replace the passenger side mirror on a Chrysler Voyager?

To replace the passenger side mirror on a Chrysler Voyager you need to first remove the window trim. Next, disconnect the wires and unscrew the mirror from the door. Reverse directions to replace with new mirror.


What are the procedures to replace the passenger side power mirror on a 2004 Nissan Altima?

I have a 2002 altima & just replaced mine a couple weeks ago. its very simple. the mirror has three screws bolting it to the car. To rempve you have to access the screws from inside the car. with the car door open you can pop off the small piece of the door panel where the mirror is located. just give it a tug. then you will be able to remove the screws with the proper socket (i dont remember the size.) you have to un hook the wiring harness & everything should be loose after that/.


How do you replace the temperature sensor in the passenger mirror on a Citroen Picasso?

it is in driver mirror


How do you replace the passenger side mirror on 2001 Toyota Sienna?

The passenger side mirror on a 2001 Toyota Sienna is mounted by screws. To replace the mirror remove the mounting screws and unplug the wire clip.