dissconnect the handbrake cable, remove the flexi brake pipe, remove the 2, 13mm bolts from the sliders and take off the caliper. when fitting the new one you must wind back the piston back as far as it will go.put in your brke pads fit your caliper tighten up your 2 13mm bolts fit pipe and hbrake cable and bleed the system,
Replace the brake pads.
Pull the carpeting behind the brake light. Unclip the assembly, replace bulb.
By going to the nearest service!
where do you put the tranmission fluid on a 1999 Audi A8
You may need a rear disc brake caliper tool for your car. See the link below to see what it is C-clamps also work but you have to be careful to squeeze the caliper straight in. Take your time.
replace brake line
You need a tool mostly used on ford cars that turns the piston while pressing it.
to fix the problem in the brake system
a special scanner called a v.a.g. has to be used to retract the electronic e brake system, and will also retract caliper piston..DO NOT TRY WITH OUT TOOL !!!!!
Could be the brake caliper or the CV joint going.
check your brake pads
They need to be wound back in, using a special tool, a G-clamp also work to push it back, with the rotating part on the caliper piston.