Want this question answered?
no no
Signal lights staying on withot flashing indicates either front or rear signal bulb not working on the Audi
Rear end of what?
Answer : unscrew the signal lens and remove the signal bulb and replace with 1157 bulb reverse process
your rear bulb is blown - replace the bulb The turn signal blinks fast because the bulb is going out. That is also why the others dont blink.
The rear turn signal on the 2009 328i is an array of LEDs and isn't a single bulb which can be replaced. The whole assembly needs to be switched out.
Open bonnet, remove anything in your way to the rear of the headlight (air ducts, battery, etc.), remove rear panel from the light, replace bulb, use small hands.
Open the rear hatch of your van. There are two black button like protrusions behind the hatch next to the turn signal lamp. Pry these out and remove lens. Replace bulb.
rear you use a torx driver to remove taillight assembly screws. them replace bulb.
Turn signal what: front bulb; rear bulb; flasher unit; fuse???See "Related Questions" below for each
Righty tighty, lefty loosey.
Replacing the turn signal bulb in the rear lights is an easy task. Open the tailgate. Remove the two screws on the inside of the black casing and pull the light housing toward the outside of the vehicle. Twist the bulb socket 90 degrees, remove the bulb and replace with a new one.