take wheel off
take two bolts off of brake caliper and take caliper off
unscrew 4 nuts off of rotor and take the rotor off
take differential cover off
move axle until you can see a pin in the middle between two gears
pop the pin out using a punch and hammer
remove c clip and pull the the axle out to remove wheel bearing
If you
how hard is it to replace a rear wheel bearing 1999 Honda crv. this crv does not have rear axle's in it. thank you
ask autozone online
take off wheel bearing, put new one on, drink beer, repeat
About 7 maybe 8
how do you change a 1998 Honda accord front wheel bearing
The Honda accord rear will bearing should be torqued at 60 pounds. You can ruin the wheel bearing or the wheel seal if you over torque the wheel bearing nut.
In some Honda's, you have to pull the axle shaft in. That may mean some disassmbly of the front end.
what is the torque on front wheel bearings for 1998 honda accord
No, you should not. You are either tightening the wheel bearing to tightly or too loosely or the bearing race needs replacing. Take the vehicle to a professional and see what is wrong.
no need to replace wheel bearing unless the wheel bearing is worn out
The rear axle bearings on a Honda 300ex are replaced by first removing the rear wheel. The bearing cap and retaining ring are then removed and the bearing is then pulled from its housing.