After you have removed the black bracket, there is another bracket of machined metal under it. You will have to remove the three bolts holding this bracket in place. After that simply replace the belt.
Replace the ignition wires.
sounds like you need to replace the serpentine belt
from a 1992 what please? in regards to your serpentine, the engine should, if your lucky have a diagram of how it goes.
get someone that knows what they are doing, to replace it the 2 long front engine mount bolts need to be removed to replace serpentine belt
you go to the Toyota place
Need to know what engine you have in order to answer this.
The cost to replace an engine for Toyota Corolla is around $1,500. The exact price will depend upon how much labor is going to cost.
How do you seal a leaking oil sump in 2c toyota diesel engine
Take it to a Toyota dealership
You acces the oil filter on the 4cylinder engine through the passenger side front wheel well. There should be an acess area for you to go through.
yes,the only difference is the carb and the intake manifold.both engines have the same mounting]
loosen the one or two bolts holding the alternator in place, i believe 14mm, then loosen the 12mm on the adjuster (side) and "screw" the 12mm bolt down to lower the alternator down enough and replace the belt. This is almost the same for every Toyota engine which doesnt use an automatic belt tensioner (serpentine) on the alternator.