2 screws 1 on top of the light(open the hood) the other is hidden behind the metal facia on the bottom facing forward,then pull light forward careful not to break the plastic tabs off. twist the bulb holder to the left and walla there it is
I took a few screws out of the front wheel well mud guard behind the marker light and reached in through there to remove and replace the side marker light.
http://www.monterosportonline.com/diy-ext1.html Mystery solved, though it may not be as easy as a normal truck bulb replacement. Good luck!!
In the front wheel well there are platic screw latches that hold wheel well coul in place. Remove the front ones to gain access to side marker light compartment.
where can I find a video on how to replace a 2006 rear SIDE MARKER bulb>
To replace a side marker bulb on a Honda CR-V, open the hood and remove the small screw on the back of the bulb. Pull the bulb forward and it will come out easily. Replace the bulb.
Take hold of the 2000 Mitsubishi Sport front side marker lightbulb connector. Push the connector in and turn at the same time. Do the same thing with the lightbulb. Reverse the process to install the new front side marker lightbulb.
how to replace bulbs on a 2009 mitsubishi eclipse
how do you replace side marker light on 2008 chevy trailblazer
how do you replace standing light bulb in the s430
Open the hood to the engine compartment. Take hold of the headlight light bulb connector. Push the connector in and turn it at the same time. The headlight light bulb will come out. Reverse the process to install the new light bulb.
I am guessing brake lights? But there are two screws inside of the truck that need to be removed - freeing the light (all but the wires) you will then need to remove the bulb by twisting counter clockwise.
Drive it into your favorite oil change station and tell them your light is out. Within 15-minutes they'll do the work for you. Last time I needed a bulb changed it cost me about $10 for parts and labor.