Joe, I don't think you had better try this yourself. I'm not sure you know what a spark plug is.
I think Joe knows exactly what a spark plug is. The stanza has four on the intake side and four on the exhaust side. The exhaust side plugs are easy to pull, where as the intake side requires a good long extension and some patience.
the exhaust side is by the exhaust manifold,intake side is next to fuel injectors.
i have to coils which coil is the intake coil
.006" intake and .010" exhaust
The intake and exhaust manifolds, along with the timing belt will have to be removed to gain access to the head. Remove the head and replace the gasket. Torque the bolts down to the manufacturer specs and in the order Nissan suggests.
from memory its 14thou intake and exhaust
0.012 inch - intake 0.014 inch - exhaust
None, you have to fabricate a custom one.
Your exhaust lines up with exhaust pipes ,your intake lines up with your intake runners.
remove the intake and exhaust manifolds. there are bolts that attach them onto the head and there are bolts near the carburetor that attach the intake manifold to the exhaust manifold.
The knock sensor for most Nissan V6 engines is located directly under the intake manifold. So to replace it, you have to remove the intake manifold. Good Luck.
valve clearance; Intake= 0.25mm (0.010in) Exhaust=0.30mm (0.012in)
The exhaust lifters will line up with the exhaust manifolds,Remove the valve cover if your working on a V8 and the valve that lines up with the exhaust port will be the exhaust valve,If it is a Chevy V8 they will be from standing in front of the car exhaust,intake,intake,exhaust,exhaust,intake,intake,exhaust.
look at the head with the valve cover off find where the exhaust manifold goes in tha is the exhaust valve or looking at the valves the first one is exhaust then intake then intake ,exhaust,exhaust,intake,intake,exhaust if you have the head off i think the intake valves are bigger than the exhaust
-intake: exhaust closed, intake open -compression: exhaust closed, intake closed -combustion: exhaust closed, intake closed -exhaust: exhaust open, intake closed
right behind the alternator on the truck and in the intake by the aac valve on a stanza ang axxess
No. which manifold gasket are you wanting to replace? Intake or exhaust?
2 per cylinder,4 intake and 4 exhaust ,they are different.
the intake are next to the carb and the exhaust are next to the exhaust manafold intake are .008 exhaust are .012 with the engine warm good luck
Remove intake & exhaust manifold, then remove head. Requires knowledge and skill.
Remove the intake and exhaust manifold, then remove the head.
The EGR, or exhaust gas recirculation valve, takes inert exhaust gasses drawn from the exhaust system and reintroduces them into the combustion chamber through the intake manifold.
Yes the intake and exhaust valves have to be close.
Trace the runners. You can see the exhaust runners leading to the exhaust valves, and the intake runners leading to the intake valves.
The intake valves are in the intake ports, the exhaust valves are in the exhaust ports.
The oxygen sensors are screwed into the exhaust system. They are not under the lower intake.