0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Your 1997 geo tracker will not start unless you jump the solenoid with a screwdriver what is wrong?
replace the solenoid ,is shorted.
What to do if starter is grinding flywheel?
Sounds like solenoid is not releasing or ignition switch is not moving from start to run position. If solenoid is located on top of starter remove clean plunger and replace If solenoid is on firewall replace If the starter is not fully engaging the flywheel, you'll need to either replace the starter or the Bendix/solenoid assembly. If the flywheel has been damaged, you'll need to replace that as well.
On your 1990 Nissan 4wd hardbody sometimes you have to hit the starter with a 2x4 for the truck to start. What is the problem?
Starter solenoid sticking. Replace the solenoid if it is external. If it is internal, then just replace thee starter. It will cost a little more but you will have a new starter and solenoid.
How do you trouble shoot John deere Lt 155 solenoid?
I have a JD LT 155 C. I have replaced the solenoid and the mower still want start. There is 12 volts between the battery and the solenoid. When I test the voltage between the solenoid and the starter, the reading is 5 to 6 volts. Why is there a drop in the voltage to the starter?
When 1992 galant key is turned to start sometimes It will do nothing second time it will start?
If you get a single "Click" the first time Check for dirty or loose battery terminals, check wires on solenoid, or replace solenoid
What could cause a 2001 Dodge Intrepid to click when trying to start?
the solenoid on your starter is finished, replace the starter......
My Tacoma won't start right off the bat It clicks and after numerous tries it starts The battery and starter are ok and the cables are in good shape Please help?
It's your starter solenoid. Toys are hard to replace just the solenoid. replace the starter!!!!!
What would casue a 2002 Kia Spectra not start?
solenoid needs replaced but instead just replace the whole starter
Your 1994 Ford Explorer will not start the starter was tested and the battery is good there is a click from the relay but that is all?
you need to replace the starter solenoid usually on a ford the solenoid is located on the side of the engine bay
Why doesn't my 65 fairlane turn the motor with the switch I need to jump start from solenoid. I has new solenoid and switch.?
Did you replace the ignition switch? Not the key tumbler but the actual ignition switch. If so, you have a wiring problem.
I replace the solenoid on 87 ford bronco. No when reconnecting the battery the engine trys to start without the key?
I had the same problem and it was a bad starter.
What is wrong with your car if you replace the starter and catalytic converter and your car wont start just clicks when key is turned?
solenoid or relay switch
