Disconnect the battery. The starter is located on the back side of the engine (the side closest to the firewall). Undo the main battery cable from the starter solenoid (held in place with a nut and washer). Disconnect the two smaller leadwires (push-on connector) from the solenoid. There are three bolts holding the starter to the bellhousing and either one or two bolts holding the support bracket from the starter to the engine block. Remove all the bolts and then the starter can be taken out by passing it underneath the intake/injection manifold and taking out the passenger side of the engine compartment (right side if facing forward). Cheers Malcolm
The Mazda 323 of that time from had a 1600cc engine but that isn't going to effect the issue of where to get a wiring diagram. Haynes makes a manual for the 1990-1994 Mazda 323. If you have a 1986-1989 Mazda 323, you will need to get a FSM (Factory Service Manual).
turn the key , if it starts it works..
where are you located as i need a starter for my 87 323
The wreckers perhaps.
.144
1-3-4-2
replace headlight on mazda sp20
Try a 1988 323
Go to a mechanic :)
It is on the fender right beside the coolant reservoir.
Next to the radiator on the drivers side, in front of the battery.
Mazda made a 323 "GT" turbo 4 door sedan for at least 2 years, 1988 and 1989. It featured the 1.6 DOHC (B6T) engine that was also standard for the 323 GTX. It was rated at 132 bhp.