The taillights are an assembly. The lens covers can not be replaced separately
open the trunk and there should be a couple screws where the lights are.
To replace the brake light on a 2001 Dodge Durango the light lens must be removed. It is held on by a clip on one side and a hinge on another. It opens like a door to access the brake light housing.
The fuses on the 2000 Dodge Durango should be labeled for each part such as the tail lights. The tail light fuse is a 30 A.
From behind the light bezel (under the truck) quarter turn and remove the lamp holder. Replace with an "893" type bulb
Pull the switch and change bulb in rear. 1 for night light and 2nd for fog light indicator.
To change your Durango's tail light, first make sure to have a flat head screw driver and a new bulb. You will then open your trunk and remove the screws to the tail light, swap out the bulbs and replace the housing case.
under the dash
Same thing happened to my 1998 Dodge Durango and I had to replace the battery connector wires...like $30...
Your Dodge Durango may stall when idling at a stop light for a couple of reason. One reason may be that a part needs to be replaced on the car.
4x4 dash lights on a Dodge Durango don't work
C'mon... someone out there must know how to do this... My light is on, too... and my local Dodge dealer is telling me I have to replace the whole console!!! If all of the tires are set properly, then you have a sensor or module failure.
Owner's manual.