take off the serpentine belt by removing the tension from the pully let the tension back off should be 1 bolt holding on the tensioner on remove it and replace with a new one put the belt back on sometimes it is wise to make a digram of the belt routing first
The tension pulley should have a bolt that holds it on, allowing you to replace the unit.
Remove the belt, then remove the bolt holding in the idler pulley.
The tension spring is broken, and the entire assembly must be replaced.
I had this problem in my 92 Plymouth Voyager. You need to replace the tension pulley. They get old and become out of alignment.
You don't. The pulley is pretensioned by the manufacturer. If the belt tension is incorrect, the pulley must be replaced.
How to replace Wiper Blades on 2003 Dodge grand caravan ?
how to remove the alternator on 2006 dodge caravan 3.3 lite and also replace the new alternator back on 2006 dodge caravan
massage oils usually work and alot of alchahol will make the repalcement easier to handle.
Is there a Video that I can watch on How do you Replace the Alternator on a 1994 Dodge Caravan?
You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.
Should pull the drive pulley and then you can pop off the old seal with a screw drive and press in the new seal.
Loosen the tensioning pulley and install new belt. There should be a routing diagram in engine compartment or on hood.