1. Pull the tensioner back with a 3/8 inch breaker bar and remove the belt.
2. Take the bolt holding the tensioner onto the head out.
3. Take the tensioner off.
Just above the A/C pulley. The a/c pulley is a large ribbed pulley that has 3 bolts and a triangular plate on it. The tensioner is small and smooth and is just above the a/c pulley. more info and a pic here. http://www.rldassociates.com/zx2/howto/belt.htm
Begin by loosening the tensioner pulley on your 1999 Mitsubishi Eclipse. The alternator belt will become loose and can be removed. Put the new alternator belt on and tighten the tensioner pulley.
The idler tensioner pulley on your 1999 Ford F3 50 pickup truck is held in place with a single retaining bolt. The retaining bolt will go through the middle of the pulley. Tighten the retaining bolt to install the tensioner pulley.
cant adjust must replace
How do you replace a 1999 Ford Escort headlight bulb?"
Starting with the crankshaft pulley go clockwise 1. automatic tensioner 2. alternator 3. powersteering pump 4. idler pulley 5. A/C compressor
Put a 3/8 inch ratchet in the end of the belt tensioner. It is an arm with a pulley on the end of it which contacts the back side of the belt. Pull the ratchet toward you to release the pressure on the belt. Then take it off the pulleys.
9/12
1. Loosen the tensioner with a 3/8 inch ratchet in the hole and pull back. 2. Take the belt off the tensioner. 3. Take the side bolt going into the head off. 4. Take the tensioner off.
belt tensioner
How do you replace a 1999 Ford Escort headlight - could use a picture.
Begin by loosening the tensioner pulley on your 1999 Oldsmobile Cutlass. Put your serpentine belt around the pulleys. Tighten the serpentine belt with the tensioner pulley.