Thermostats
Toyota T100

How do you replace the thermostat located on a 1993 Toyota 3.0L 4wd truck?

676869

Top Answer
User Avatar
Wiki User
2015-07-16 18:16:12
2015-07-16 18:16:12

The thermostat is located in the water pump behind the timing belt plate cover. the thermostat is in the bottom rad hoase where it conects to the motor.

๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

how do replace the thermostat on a 1999 mazda b2500 truck?

User Avatar

On my 92 Toyota Pickup V6 4X4, it is located in a different section than on the 4cyl. If you are looking straight at the engine, look to your right and down into the engine. Look for the LOWER radiator hose and follow it into the engine block. Romove the housing and this is where the thermostat on my truck was located

User Avatar

follow the radiator top hose back to engine the thermostat is there under that domed connection

User Avatar

Speedometer cable replace 1989 toyota

User Avatar

Front of the engine block on left side, below the alternator. If you replace thermostat, it is easier to replace entire housing. When you purchase one it will all come as one unit.

User Avatar

follow the lower radiator hose up to the engine, where the hose clamps is the thermostat housing. remove the 3 nuts on it and youll find the stat.

User Avatar

To replace the injectors in 86 Toyota truck 22r, simply refer to your user and service manual.

User Avatar

Probably at the engine end of the upper radiator hose

User Avatar

The fuel filter is located on the firewall on a four cylinder 1995 Toyota pickup truck!

User Avatar

I'm going on the assumption that you have a V6 in which the thermostat is between the two upper timing belt sprockets and just above the water pump. Replace the thermostat with the spring side in the block adn the air bleeder to the top.

User Avatar

you may have a bad thermostat,replace and see.

User Avatar

I have a 94 Toyota 4wd turck....I replace the radiator. it was plugged up. Water wont circulation. Fixed my problem

User Avatar

Where is the fuel filter located on a 2000 toyota tocoma pickup truck

User Avatar

ON A FOUR CYLINDER TRUCK,IF YOURE STANDING IN FRONT OF THE VEHICLE LOOKING AT THE ENGINE, THE THERMOSTAT HOUSING IS ON THE LEFT SIDE IN THE INTAKE MANIFOLD. THERE ARE 2 BOLTS ON THE HOUSING. JUST FOLLOW THE UPPER RADIATOR HOSE AND THE HOUSING TURNS STRAIGHT DOWN INTO THE INTAKE. on a 4 cylinder truck, Follow the top Radiator Hose. the stat housing is at the end of the engine side of that hose. On my 94 Toyota Pickup V6 4X4, it is located in a different section than the other answers provided. If you are looking straight at the engine, look to your right and down into the engine. Look for the LOWER radiator hose and follow it into the engine block. Romove the housing and this is where the thermostat on my truck was located.

User Avatar

How do you remove taillight cover on a T-100 toyota Truck

User Avatar

question is it 4 cycle or v6 4 cycle sample it's on front motor it's 10mm bolt's the upper goes right to it.. I recommment coolest thermostat that you can buy..

User Avatar

The fuel pump is located underneath the manifold on a 1999 Toyota Tacoma 4x4 truck. That is directly underneath the drivers side of the truck.

User Avatar

He had to replace the thermostat in his pickup truck. Another good sentence would be, the thermostat has settings on it to kick the heat or air on, depending on the temperature outside.

User Avatar

you have put a new head gasket on it.

User Avatar

Just follow the top radiator hose from the radiator to the water pump. Its right there where the hose connects. there are usually two bolts to take out and the hose housing comes off and the thermostat is just behind it.

User Avatar

you will have to replace the suspension on the truck for it to work. but yes it will fit on a Toyota Sequoia!

User Avatar

Follow the upper radiator hose from the radiator to the engine. The thermostat will be located behind the thermostat housing at engine end of upper radiator hose. Drain some coolant into a clean container. Remove upper radiator hose from thermostat housing. Remove the 3 bolts that hold the thermostat housing to engine. Remove thermostat housing. Remove thermostat. Be sure to install the new thermostat facing in the same direction as the old one was.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.