undo the 3 Philips screws in the holes under the steering column. separate the 2 halfs of the column cover buy pressing on the seam. remove the cover. there are 2 screws that hold the switch in... one above and one below and 1 harness connector. remove the screws and disconnect the connector. that is it.
are you asking about the turn signal bulbs , the turn signal switch or turn signal flasher ?
You will need to remove the retaining ring at the top of your 1995 Dodge Grand Caravan ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
My turn signal switch died on my 92 Grand Prix. Rather than attempting the repair, I took it to a shop. The steering column had to be removed to get to the switch.
On my 2001 it is part of the Hazard switch. You have to replace the entire switch on a 2001.
you need to replace your fan relay switch, in my 2000 caravan i had to remove thel left head light to reach it
A 2000 Grand Caravan does not have a cabin filter.
how do you replace a cam shaft sensor in a 2002 3.3L dodge grand caravan
How do I replace the heating coil in a 2006 Grand Caravan? I have no heat it only blows cold air.
How to replace Wiper Blades on 2003 Dodge grand caravan ?
A Grand Caravan does not have a timing belt.
No kill switch on that van.
It is on the driver's door.