with a wrench.
To replace a Pontiac Grand Am bumper cover, start by taking out either the three bolts on the side of the fender or in front of the wheels. Remove the top pushpins to remove the cover. Push back the two pins for each headlight, and pull them up. Unplug the lights. Then, get the replacement bumper, and snap it into place like the previous one.
There are bolts surrounding the headlamp. remove these and the wires.
On the bottom of the dash on the passenger side remove the black cover then remove the bolts on the blower and disconnect the wire. Reverse above to install.
There are bolts surrounding the headlamp. remove these and the wires.
either tighten the valve cover bolts, or replace the gaskets.
How do you replace starter on2.3 cy 1991 pontiac grand am
To replace the thermostat on a 1997 Pontiac Grand Am 3.1, first disconnect the negative battery terminal and loosen the clamp on the radiator hose. Next, remove the mounting bolts from the thermostat housing and insert the new thermostat.
You can replace the sheer core, on your 2004 Pontiac Grand Prix, by removing the water lines. Remove the four bolts that hold the heater core in place. Reverse the process to install the new heater core.
You need to remove the door panel to access the bolts and electrical for the mirror. To remove the door panel, it is all clips on the outside however there are 2 hidden bolts that you need to remove the cover from the door pull to access.
how do I replace water pump 2000 Pontiac Grand AM SE1?
If it's the same as a 96 Pontiac Grand AM GT, than you would need a 10mm socket and rachet there are three bolts on top of headlight remove these and just pull out headlight. Disconnect the wire going to the bulb you want to replace.
how to replace lifters on a 03 grand am