Ford Thunderbird
Water Pumps
Honda Accord LX

How do you replace the water pump on a 1993 Ford Thunderbird LX non-supercharged?

User Avatar
Wiki User
2007-12-16 07:39:45

Disconnect the battery Drain the cooling system Remove the fan

and clutch assembly from the water pump. You will need to get a fan

clutch holding tool and a Fan Clutch Nut Wrench. Ford T84T-6312-C -

Fan Clutch Holding Tool - Global Tool# 303-239 - OTC tool# 7204E1

Ford T84T-6312-D - Fan Clutch Nut Wrench - Global Tool# 303-240 -

OTC Tool# 7204E2 After loosening the fan and clutch assembly from

the water pump using the two tools listed above position the fan

and clutch asembly in the fan shroud. THEN remove the fan shroud

(which has the fan/clutch assembly in it) Loosen the water pump

pully bolts Remove the drive belt by rotating the tensioner away

from the belt by using pully retaining bolts only. (Do not pry on

belt tensioner!) Remove the water pump pulley Disconnect the lower

radiator hose, heater hose andwater pump bypass hose at the water

pump. Unfasten the bolts that attach the pump to the cylinder front

cover. Remove the pump and gasket.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.