How do you replace the windshield washer motor on a 1992 Nissan Stanza XE with a 5speed tran and a 2.4 liter motor?

Answer 1

This answer should be valid for 1990-1992 stanza. The washer bottle is behind the bumper, just in front of the wheel well on the passenger side and is very awkward to get at. You will have to first remover the top part of the bottle by going under the hood and pulling the refilling tube straight up. You will then have to locate and remove the screws holding the front of the front weel cover, and the passenger side of the plastic bumper cover. Once you remove enough screws, you should be able to pull the bumper wheel well covers back to get at the three screws which holds the rest of the bottle in place, as well as unclip the wire harness to the pump motor and the low fluid sensor. Once you have removed the bottle from under the car, you can pull the pump out. Optional: You can try to remove the pump without removing the bottle by unclipping the wire harness and attempting to remove the pump. -Sam