its pretty easy. First place to look for instructions with diagram would be on the cover of new windshiled wipers that u buy. You just need to press and snap the vipers out of the long rod at the tip. pull the vipers down, inwards along the long rod.
Assuming the Elantra is similar to the Accent....I bought new wiper blades from Wal Mart today and changed them on my 2003 Accent. There is a small lever where the blade connect to the wiper arm...depress lever and slide the entire blade toward the bottom of the arm. You might have to exert a bit of pressure. Once off, slide the new blade in the opposite direction and it should snap right on.
Take off the cowling, and disconnect the wiper arms from the motor shaft. Then remove the 3 bolts holding the Motor, inside the engine compartment. Make note of arm placement, and cycle the motor before connecting the arm. Wrong placement could damage wiper arms, hood, glass ...you.
You can watch the process on YouTube; the video will show you how to replace the wiper motor (see Related Links).
The 2005 Toyota Echo has hook-end wiper arms. See the Sources and Related Links section below for wiper blade installation videos and correct attachment/length wiper blade sizes. Also, if you purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through. Very simple.
locate the motor, buy a new one according to echo part number. unscrew it, plug it in, done.
The 2005 Toyota Sienna had a production change mid-year that affected the wiper configuration.Step 1 is to measure the length of the blade on your vehicle. "Early" Production 2005 Toyota Sienna: 14" Special Rear Wiper Blade"Late" Production 2005 Toyota Sienna: 16" Standard Rear Wiper BladeStep 2 is to be sure you get the right replacement wiper blades.Step 3: The replacement wiper blades will come with simple-to-follow, step-by-step, illustrated instructions
The wiper blades are very easy to change oo a 2005 Pontiac,,its a simple snap in installation. If you need it there is a video of the process at www.youtube.com.
The 2005 Toyota Avalon takes 26" drivers side and 20" passenger side replacement windshield wiper blades.
Two 19" blades for the front and one 14" blade for the rear. You must go to the toyota dealer for the rear wiper blade but the front wiper blades are available aftermarket. See sources and related links below for more information.
Its a little complicated for this particular vehicle since there was a mid-year production change that affected the wiper blade system. See sources and related links below because its best explained there.
Step 1 is to be sure you get the right replacement wiper blade. The 2002, 2003, 2004, 2005, 2006 Toyota Camry takes 24" driver side and 19" passenger side replacement windshield wiper blades. Step 2: As far as installation, the replacement wiper blades will come with simple-to-follow, step-by-step, illustrated instructions.
replace 2009 acura rl wiper blades
The 2005 Toyota Camry wiper blade sizes are 24" drivers and 19" passenger side wiper blades. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only. Be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
The 2005 Honda Accord takes 26" drivers side and 18" passenger side replacement windshield wiper blades.
The 2005 Ford Explorer takes 20" replacement wiper blades on both sides front and a 16" rear.
The 2005 Toyota RAV4 has a "Roc Lock 2" rear wiper arm attachment which is actually quite easy to change once you get the right replacement rear wiper blade (which can be challenging to find). See related links below for the correct wiper blade and for an installation video.
The 2005 Toyota 4Runner has hook-end wiper arms on the front and a roc lock 2 rear wiper arm. See the Sources and Related Links section below for installation videos and correct wiper blade information. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.